LIGAO MBC Automatic 7 Stage 12V 20A Car Battery Charger For Lead-acid

 LIGAO Automatic 7 Charging Stage 12V 20A Car Battery Charger



·Microprocessor Control (CPU)


·This is a fully automatic battery charger with 7 charge stages.

·Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

·7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.

·7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.

·Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.

MBC2410 实拍图Down sideMBC 侧板 通用MBC1220 (3)插头电池夹子通用 MBC 彩盒2

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery


 Mcu Controlled & 7 stage Switchmode
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach    the battery terminals. (DO NOT extend the battery charger DC cables,as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.3. Connect the inline fuse to the RED Positive (+) wire.4. Connect a ring terminal to the other end of the inline fuse.5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.7. Fit the correctly rated fuse.No matter Size or type, leave it to MBC- charge. Power of Professionals.



With CE,CB,ISO,ROHS certified by SGS.

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Our exhibition

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery



PACO Car Battery charger MBC1205 7-stage trickle charge for car battery


Packaging and shipping

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery


Our Service

1. One year warranty.


3. Excellent Pre-sales and After-sales service system.



1. Why PACO 7-stage battery charger?

1). This is a fully automatic battery charger with 7 charge stages.
2). Automatic charging protects your battery from being overcharged. You can leave the charger connected to the battery charger indefinitely.
3). Compare with traditional chargers, 7-stage charger with much more comprehensive and accurate charging process, ensure your battery longer life and better performance!
4). 7-stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They could also help restore the drained and sulphated batteries.

2. How do I know if the battery is charged?

    The charger’s FULLY CHARGED LED will illuminate (solid). Alternatively use a Battery Hydrometer A reading of 1.250 or more in each cell indicates a fully charged battery.

3. I have connected the charger properly but the ‘CHARGING LED’ does not come on?

    In some cases batteries can be flattened to the point where they have very little or no voltage. This can occur if a small amount of power is used for a long time, for example a map reading light is left on for a week or more. 7-Stage chargers are  designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts.

    If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger can then start to charge the battery and the booster cables can be removed.

4. Can I use the charger as a power supply?

    7-Stage chargers are designed to only supply power to the battery clips when they are connected correctly to a battery. This is to prevent sparks during connection to the battery or if connected incorrectly by mistake. This safety feature prevents the charger from being used as a ‘Power Supply’. No Voltage will be present at the clips until connected to the battery.

photobank (5)

WhatsApp Online Chat !